tool die design metal stamping


 

Tool & Die Making
Articles
Bend Radius
Deep Drawn
Fine Blanking
Formular
Progression strip layout

Slug pulling prevention
Tool die Design
Tool die design book
Technical Book Store


Jig and Fixture
Jigs and Fixture Design


Materials treatment
Annealing metal
Case hardening
Density
Electrical Conductivity
heat treatment process
heat treating steel

Thermal Expansion


Material
Aluminum
Aluminum Tempering
Carbon Steel
Copper alloy
Low alloys
Material nations & Equivalents
Nickel alloys
|
Steel element
Stainless Steel

Steel materials terminology
Tungsten Carbide
Wrought stainless Steel


Manufacturing
Conversion Charts
Drill Angle
Drill size
Energy Efficiency
Math Area
Machining Cutting Time
Technical articles
Work Done
Velocity


Geometric Tolerancing
GDT
Tolerance chart ISO


Quality Control
AQL
Process Capability CPK
Sampling plan
Level I, II, III



 

Tool die design

Frequent ask questions.

1. Who should read this book?
2. What happen if the down load process failed?
3. What you need to take note before make any purchase on line?
4. The content of these e-books
5. How to submit your design to us and how much we pay?
6. How to become our affiliate member?

Who should read this book?
This e-book was designed in a simple and detail self explain format, less or no explanation is required. Concepts and methods are illustrated in self explained diagram. However, the reader should have same prior experiences in press tool making and / or designing knowledge to fully benefit from this book.

What happen if the downloading process failed?
Some people may experience phone line cut off due to whatever reason during the downloading process; if this happened, you may send us an email attached with your transaction document and our product ID number. We will than send you the e-book that you had purchased via email within the next 24 hours.

What you need to know before you purchase any of our products on line.
First, You have to ensure your are entering the secure area before you entering any of your personal information on line. Check your browser window, it should appear https://. Infront of the web site address or an lock icon at you browser status tool bar.
Secondary, you should be a registered member of Pay pal (A third party organization to ensure a safe and secure transaction between a buyer and a seller) if you have not been a member yet, you may like to do so by clicking here to be one. Registration is Free!

You should also read our term & condition. Before making purchase.

The contents of this e-book.
All concepts and examples in this e-book are the actual design of the particular component, all concepts and idea are proven workable. The photo of the actual progression strip and product are attached with the e-book.

How to submit your design to us.
If you think you have a very unique design and wanted to share with all of us, please send a picture of the finished product and a progression layout to us ( in compressed form, eg. Winzip) . If we accept your design, we will give you an offer. Your should write up an e-book in "MS word" platform, according or similar to our e-book format. We will do some adjustment or amendment on it if necessary.
Please also be informed that, WiseTool has the right to use the design in any purpose once we purchased it from you.

How to become one of our affiliate
We pay good commission to you for recommending any customer to us, shall they purchase our e-book.
Detail will be coming up soon.

Back to top